FABRIC-3.md: close HOTPLUG, hand off detection point to WIREBIND

Third node in the iterative Q&A pass: re-checked sk_repl_idle() and the
bot_msc_attach_pending/detach_pending doc comments directly against the
original Milestone 2 punch-list wording. The flag-set-by-xHCI,
flag-consumed-by-sk_repl_idle() pattern isn't literally a registered
callback but achieves the same documented decoupling goal
("keeps xhci.c decoupled from block_subsystem.c"), confirmed live on all
three arches. Closed as written.

Recorded a handoff note for WIREBIND's own future scoping: reuse the
existing homeblocks_sig_check() result as the branch point (recognized
drive -> cert-verify+birth, blank/foreign -> stays plain block storage)
rather than inventing new hotplug detection. Updated the §E graph's
HOTPLUG node from partial to done.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U14ET9CWAtbQMbYqomKgXd

FABRIC-3.md

@@ -107,12 +107,13 @@ decisions get added here, not to `FABRIC-2.md`. Follow the same discipline `FABR
 
 ### From FABRIC-2.md §X, Milestone 2 — USB hardware stack
 
-- [ ] Decide and implement where the hotplug event surfaces to the rest of the kernel —
+- [x] **CLOSED 2026-08-27 (FABRIC-3.md §F.3).** Decide and implement where the hotplug event
-  likely a callback registered by whatever owns the home-blocks logic, not xHCI code calling
+  surfaces to the rest of the kernel. Re-checked directly against `sk_repl_idle()` and the
-  into `block_subsystem.c` directly (matching the existing "kernel/Artemis decoupling
+  `bot_msc_attach_pending`/`bot_msc_detach_pending` doc comments in `xhci_driver.h`: Milestone
-  boundary" pattern already documented in `block_subsystem.c`). **Partially addressed by
+  2h's flag-set-by-xHCI/flag-consumed-by-`sk_repl_idle()` pattern isn't literally a registered
-  Milestone 2h's `blkio_usb.c`/connect-time attach wiring (`FABRIC-2.md`, 2026-08-25) — worth
+  callback, but its own doc comment confirms it was built deliberately to achieve the same
-  re-checking whether that closes this item outright before treating it as still fully open.**
+  goal — *"keeps xhci.c decoupled from block_subsystem.c"* — and that decoupling is real,
+  live on all three arches. Closed as written; no further design work on this node itself.
 
 - [ ] Implement CBW/data/CSW for SCSI WRITE(10) — this is where the earlier "read/write,
   unquestionable" requirement actually gets satisfied. Still the single biggest functional
@@ -1386,7 +1387,7 @@ punch list hides that; a graph doesn't.
 ```mermaid
 graph TD
     W10["❌ WRITE(10) SCSI support<br/>(Milestone 2 — biggest single blocker)"]
-    HOTPLUG["🟡 Hotplug event surfacing<br/>partially addressed, M2"]
+    HOTPLUG["✅ Hotplug event surfacing<br/>CLOSED 2026-08-27, M2 (§F.3)"]
     STALL["❌ USB error/stall recovery (M2)"]
 
     M6["✅ Milestone 6 — capsule PKI<br/>DONE 2026-08-26"]
@@ -1450,11 +1451,11 @@ graph TD
     classDef unblocked fill:#a83,stroke:#333,color:#fff
     classDef open fill:#666,stroke:#333,color:#fff
     classDef partial fill:#883,stroke:#333,color:#fff
-    class M6,PH8,EXPIRE,MSGSHAPE done
+    class M6,PH8,EXPIRE,MSGSHAPE,HOTPLUG done
     class W10,STALL,FIRSTTOUCH,BMAPWRITE,BMAPREAD,UNCLEAN,WIREBIND,BINDSTEP,DETACH,MINT blocked
     class CERTVERIFY unblocked
     class BMAPFMT,ACLKEY,RUNCAP,MSGMIGRATE,SSDSCOPE,ROUNDTRIP,POLYBLOCK open
-    class HOTPLUG,MIGSM partial
+    class MIGSM partial
 ```
 
 **Legend:** ✅ done · 🔓 unblocked-but-not-built · ❌ not started, no open design question left
@@ -1584,6 +1585,35 @@ from an attached thumbdrive. Doesn't change F.2's design, just its intended reac
 remembering when `VMIdentity` actually gets built, so it isn't accidentally scoped narrower
 than this.
 
+### F.3 — `HOTPLUG` (closed)
+
+Re-checked directly against the live code before asking anything, per Captain Bob's own
+standing note not to "grep-sample" — read `sk_repl_idle()` (`starkernel/repl.c:82-190`) and
+the `bot_msc_attach_pending`/`bot_msc_attached`/`bot_msc_detach_pending` doc comments in
+`xhci_driver.h:244-265` in full.
+
+**Finding: closed.** The original Milestone 2 ask was "decide and implement where the hotplug
+event surfaces... likely a callback registered by whatever owns the home-blocks logic, not
+xHCI code calling into `block_subsystem.c` directly." What's built is a flag-set-by-xHCI,
+flag-consumed-by-`sk_repl_idle()` pattern — not literally a registered callback, but the
+`bot_msc_detach_pending` field's own doc comment states the goal directly: *"keeps xhci.c
+decoupled from block_subsystem.c"* — and that decoupling is real and working, confirmed live
+on all three arches (attach: `blkio_usb_open_msc()` → `homeblocks_sig_check()` →
+`blk_subsys_attach_device()`; detach: `blk_subsys_detach_device()`, symmetric shape).
+
+**Confirmed 2026-08-27:** close this node as done. No separate design work remains on
+`HOTPLUG` itself — the answer for `WIREBIND` (the node depending on it) is not "build a new
+hotplug-detection mechanism," it's "reuse this one."
+
+**Handoff note for `WIREBIND`'s own future scoping pass:** the existing attach point already
+calls `homeblocks_sig_check()`, which already distinguishes a recognized home-blocks drive
+(`HOMEBLOCKS_SIG_OK`) from blank/foreign/corrupt media (`HOMEBLOCKS_SIG_BLANK`/
+`BAD_VERSION`/`BAD_CRC`/`READ_ERROR`). That result is the natural branch point for `WIREBIND`:
+a recognized drive continues into cert-verify + `capsule_birth_baby()`; a blank/foreign one
+stays plain read-only block storage, matching the reasoning already documented for the
+`WRITE(10)` refuse-on-blank-media logic. Not built yet — `WIREBIND` still needs its own Q&A
+pass — but it doesn't start from zero.
+
 **Two new standing items that came with this, both explicitly deferred (not part of the
 current iterative pass, recorded so they aren't lost):**
 - **A full codebase audit pass**, using this same iterative Q&A workflow, to scavenge for more