Closes §I.3 (Milestone 5 remainder): WIREBIND now tracks which VM is attached via the home-blocks USB path, and a new EJECT word plus the existing hot-unplug signal both flush/reset-console/kill through it (FABRIC-3.md §F.10). Closes §I.8 (EXPIRE/ACL), re-scoped: the original "admit the zuse session as a Stadium patron and reap on TTL" plan was invalidated a second time -- Zuse authenticates directly onto Hera, who is patron zero and permanently pinned, so there is no patron for a reap sweep to ever find. Built instead as a detach-triggered logout (capsule_zuse_boot_logout()), the same trigger EJECT/hot-unplug use for regular WIREBIND users, so neither identity is a special case. Required a companion fix: install_and_activate() used to skip re-running ACL-ZUSE-BOOT whenever the cert was already installed, which made a logout permanent for the rest of the boot; the outer re-attach gate now checks zuse_session (clears on logout) instead of zuse_cert_installed (a deliberate permanent one-way ratchet, left untouched). Verified 3-arch boot to ok> (amd64/aarch64/riscv64, each in the foreground) after both steps; logs and DoE CSVs from this session's verification runs included per this repo's own audit-artifact convention. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019YcT3H2PQeyujrzjqS3Var
118 lines
5.0 KiB
C
118 lines
5.0 KiB
C
/*
|
||
StarForth — Steady-State Virtual Machine Runtime
|
||
|
||
Copyright (c) 2023–2025 Robert A. James
|
||
All rights reserved.
|
||
|
||
Licensed under the StarForth License, Version 1.0
|
||
*/
|
||
|
||
/**
|
||
* capsule_wirebind.h - WIREBIND: the real thumbdrive-attach call site
|
||
* (FABRIC-3.md §F.5/§F.23). Assembles pieces already built and
|
||
* individually verified this session -- CERTVERIFY (vm_identity.h's
|
||
* vm_identity_from_cert()), RUNCAP (capsule_runcap.h), the console-VM +
|
||
* user-VM pair (capsule_console.h, sk_repl_dispatch_line() in repl.c) --
|
||
* into one automatic sequence, replacing the RUNCAP-TEST/PAIR-TEST
|
||
* diagnostic words that exercised each piece by hand.
|
||
*/
|
||
|
||
#ifndef STARKERNEL_CAPSULE_WIREBIND_H
|
||
#define STARKERNEL_CAPSULE_WIREBIND_H
|
||
|
||
#ifdef __STARKERNEL__
|
||
|
||
#include "starkernel/homeblocks_sig.h"
|
||
#include "starkernel/vm_identity.h"
|
||
#include "vm.h"
|
||
|
||
struct blkio_dev;
|
||
|
||
/**
|
||
* capsule_wirebind_verify_cert - Read the cert region off dev and verify
|
||
* it against mama_vm's own Zuse identity. Shared by both
|
||
* capsule_wirebind_try_attach() (the original attach) and BINDSTEP
|
||
* (mama_word_use(), mama_forth_words.c -- re-verifies live on every USE
|
||
* of an identity-locked VM, per FABRIC-3.md §F.9 decision 1) so both
|
||
* call sites check the exact same thing the exact same way.
|
||
*
|
||
* No-op-and-fail (-1) if sig->cert_offset is 0 (no cert region -- a
|
||
* genesis-mode Zuse drive, or simply not a regular identity drive) or
|
||
* mama_vm has no installed Zuse cert yet.
|
||
*
|
||
* @param dev Already-open block device to read the cert from.
|
||
* @param sig Its already-checked homeblocks_sig_t.
|
||
* @param mama_vm Hera's own VM -- the trust root (zuse_cert_pubkey).
|
||
* @param out Filled with the verified identity on success.
|
||
* @return 0 on success, -1 on any failure (read, verify, or precondition).
|
||
*/
|
||
int capsule_wirebind_verify_cert(struct blkio_dev *dev,
|
||
const homeblocks_sig_t *sig,
|
||
VM *mama_vm, VMIdentity *out);
|
||
|
||
/**
|
||
* capsule_wirebind_try_attach - Try to verify and bind a just-attached
|
||
* regular (non-Zuse) identity drive.
|
||
*
|
||
* No-op if sig->cert_offset is 0 (a genesis-mode Zuse drive has no cert
|
||
* region -- that's capsule_zuse_boot_try_attach()'s own job, not this
|
||
* one's) or if mama_vm has no installed Zuse cert yet (nothing to verify
|
||
* the attached cert against). Otherwise: reads the cert devblock(s),
|
||
* calls vm_identity_from_cert() against mama_vm's own zuse_cert_pubkey
|
||
* and sig->drive_uuid. On success, reads the drive's own
|
||
* user_identity_seed_t for its username and births a console VM +
|
||
* RUNCAP-born user VM pair (idempotent -- no-ops if that username is
|
||
* already live this session), installs the verified VMIdentity onto the
|
||
* user VM, and registers the "<username>~user" pairing
|
||
* (sk_repl_dispatch_line(), repl.c, looks for this). Does NOT USE the
|
||
* new console automatically -- that stays an explicit, later,
|
||
* ACL-gated step (BINDSTEP, §F.9), not something a bare attach should
|
||
* trigger silently.
|
||
*
|
||
* @param dev The just-attached, already-open block device.
|
||
* @param sig Its already-checked homeblocks_sig_t.
|
||
* @param mama_vm Hera's own VM (the verifier -- her zuse_cert_pubkey is
|
||
* the trust root regular user certs are checked against).
|
||
*/
|
||
void capsule_wirebind_try_attach(struct blkio_dev *dev,
|
||
const homeblocks_sig_t *sig,
|
||
VM *mama_vm);
|
||
|
||
/**
|
||
* capsule_wirebind_eject - Graceful detach of whatever VM is currently
|
||
* attached via the home-blocks USB path (FABRIC-3.md §F.10, decision 1).
|
||
* The drive is still physically present when this runs.
|
||
*
|
||
* Sequence: resolve the tracked attached-VM id to a live registry entry
|
||
* (no-op, returns -1, if nothing is tracked or the entry is already
|
||
* dead/gone -- capsule_vm_kill()'s own idempotency covers a VM already
|
||
* killed by some other path); blk_vm_flush_all() while the VM is still
|
||
* alive; if the console's active VM is this same VM, reset it to Hera
|
||
* (sk_repl_set_active_vm(NULL)) *before* teardown -- required, not
|
||
* optional, to avoid a dangling console pointer; capsule_vm_kill() by
|
||
* name; clear the tracked state.
|
||
*
|
||
* Single-USB-device constraint (§F.8) means there is never more than one
|
||
* candidate, so this always targets "whatever's currently attached" --
|
||
* no name argument.
|
||
*
|
||
* @return 0 on success, -1 if nothing was attached to eject.
|
||
*/
|
||
int capsule_wirebind_eject(void);
|
||
|
||
/**
|
||
* capsule_wirebind_unclean_detach - Abrupt-path counterpart to
|
||
* capsule_wirebind_eject() (FABRIC-3.md §F.10, decision 2 -- the UNCLEAN
|
||
* node, closed alongside EJECT). Called from the existing
|
||
* bot_msc_detach_pending hot-unplug signal (repl.c) -- the device is
|
||
* already gone by the time this runs, so no flush is attempted; data
|
||
* since the last flush is lost, which is correct unclean-removal
|
||
* semantics. Otherwise identical to capsule_wirebind_eject(): same
|
||
* active-VM reset-before-kill step, same tracked-state clear.
|
||
*/
|
||
void capsule_wirebind_unclean_detach(void);
|
||
|
||
#endif /* __STARKERNEL__ */
|
||
|
||
#endif /* STARKERNEL_CAPSULE_WIREBIND_H */
|