Files
LithosAnanake/disk
Robert Allan James bd266942ce v2.0.1: generic GPT/FAT32 UEFI bootable thumbdrive image (thumbdrive goal)
New `make -f Makefile.starkernel thumbdrive` goal builds a generic
UEFI-bootable GPT disk image (disk image -> GPT + one FAT32 "STARKERNEL"
EFI System partition with EFI/BOOT/BOOT<ARCH>.EFI + startup.nsh) that can be
written directly to a USB thumbdrive with dd and boots on any real amd64 UEFI
firmware (Beelink SER5 path) as well as under QEMU. The monolithic loader
embeds the whole kernel, so the ESP needs only the UEFI fallback boot path.

Verified under QEMU by attaching the image as a USB mass-storage device (not
cdrom): OVMF BDS auto-selected "UEFI QEMU QEMU USB HARDDRIVE" (Boot0002),
then kernel booted normally -- LithosAnanke v2.0.0, POST 1012/0/0 + ok>,
rng: backend = virtio-rng + entropy: ready, Artemis ready, and the USB BOT/
xHCI storage path enumerated (READ CAPACITY10 -> MSC device ready -> READ10
CSW PASS). This mirrors the real-hardware SER5 flow: firmware boots the USB
thumbdrive's ESP, and the OS's own storage rides the same USB BOT/xHCI path.

Works for all three arches via the arch-mapped EFI boot name.
2026-08-29 10:12:43 -04:00
..

disk/

QEMU disk images used for Artemis (block-storage VM) persistence testing. Mounted via Makefile.starkernel's ARTDISK variable (default disk/artemis.img) as a virtio-blk-pci device on all three architectures' kernel QEMU boots — not scripts/rundisk.sh, which targets a separate, currently-unused disks/ (plural) directory for the hosted VM's --disk-img= flag instead.

  • artemis.img — standard Artemis persistence test disk. Reformatted 2026-08-02: this image had been stuck in a corrupted state (valid LithosAnanke magic header, but data not matching what ART-READ-TEST expects) since before this repo's own git history begins (git log shows it already broken at the initial commit, carried over from the pre-split monorepo). Chasing down the resulting persistent FAIL: persist-read traced to the data, not the code — the write→reboot→read round trip works correctly on a fresh image (see artemis-debug-roundtrip.img below). Reformatted by blanking the file and letting a normal boot format+write-test it; verified PASS: persist-read on amd64, aarch64, and riscv64 against the same image afterward (cross-arch resume, matching the arch-neutral on-disk format .claude/ARTEMIS.md specifies).
  • artemis-debug-roundtrip.img — round-trip regression fixture created during that investigation. Known-good: format → self-test → write-test → reboot → resume → PASS: persist-read, confirmed 3 times in a row. Keep this in a passing state; if a future change breaks it, that's a real regression, not a stale-fixture artifact like artemis.img was.
  • artemis-persist-test.img — persistence round-trip test image (pre-existing; history/state not re-verified during the above investigation).
  • artemis-poison.img — a separate test image (exact scenario not documented elsewhere in the repo as of this writing; name suggests an adversarial/corruption test, not confirmed).
  • artemis-unrecognized-test.img — exercises ART-HALT-UNRECOG (.claude/ARTEMIS.md acceptance criterion #6). Regenerated 2026-08-02: the previous copy of this file had itself been silently reformatted by a since-fixed bug in the generic block subsystem (src/block_subsystem.c) — it carried a valid low-level 'STFR'/v2 header despite being meant to represent foreign disk content, direct forensic evidence of the bug described in .claude/ARTEMIS.md's Build Status item 6. Regenerated as 30MB of a repeating POISON-UNRECOGNIZED-DISK-TEST-FIXTURE--NOT-BLANK-NOT-STFR-NOT-ARTEMIS-- ASCII pattern — deliberately neither blank, nor the block subsystem's own 'STFR' magic, nor Artemis's "ARTEMIS\0" marker. Verified on amd64 and riscv64 post-fix: boot correctly halts (ARTEMIS HALT: unrecognized disk content) and the file's sha256 is now byte-for-byte identical before and after boot. Keep this fixture in this poisoned state — if a future change makes its sha256 change across a boot, that is exactly the regression this fixture exists to catch.

Note on incidental header churn: artemis.img picks up a few changed header bytes on every ordinary boot even though no user data changes — blk_subsys_attach_device() always records a fresh mounted_time on a successfully recognized disk, which gets flushed at shutdown. This is expected bookkeeping, not a bug; revert it before committing rather than carrying timestamp noise in git history.

  • usb-thumbdrive-test.img — 64MB raw image backing a QEMU usb-storage device attached to the xHCI controller's bus (xhci0.0) for Milestone 2e/ 2h hotplug testing, added 2026-08-22. Blank (all zero) — blkio_usb.c + blk_subsys_attach_device() wiring (Milestone 2h, done 2026-08-25) attach it as BLK_FMT_PROVISIONAL every time, which is the intended, exercised state; not yet BLK_FMT_FORMATTED via BLK-CONFIRM-FORMAT.

  • usb-thumbdrive-test2.img — 64MB raw image, added 2026-08-25 for Milestone 2h hot-detach/re-attach verification. Filled with a repeating HOTDETACH-REATTACH-FIXTURE-2026-08-25-- ASCII pattern, deliberately distinguishable from usb-thumbdrive-test.img's all-zero content — the point is proving a block read after detaching usb-thumbdrive-test.img and re-attaching this one actually returns this pattern rather than silently replaying the old device's cached (all-zero) content, which is exactly the class of bug a same-LBN-range device swap can cause if the VM block window cache (vm->blk_vm_cbuf[]) isn't re-validated on a hit.

  • artemis-reloc-test.img — 64MB raw image, added 2026-08-25 for single-block relocation (RELOCATE-BLOCK) persistence verification. Blank at creation; a genuinely fresh volume was required (not artemis.img) because relocation-table capacity (reloc_start/reloc_devblocks in blk_volume_meta_t) is only reserved by blk_compute_fresh_geometry() on a fresh format — artemis.img predates the feature and correctly reads back reloc_devblocks=0 from what was previously unused header padding. Attach via make -f Makefile.starkernel ARTDISK=disk/artemis-reloc-test.img ... (the Makefile's ARTDISK var is ?=-overridable). Not yet BLK-CONFIRM-FORMAT-committed in the repo copy — commit that step live if reusing this fixture for further reloc-table testing.

  • artemis-metafence-fresh.img — 30MB raw image, blank at creation, added 2026-08-26 for the top-of-device system-metadata fence (meta_fence_blocks in blk_volume_meta_t, FABRIC-3.md Phase 8 §C). Same reasoning as artemis-reloc-test.img above: the fence is only initialized to BLK_META_FENCE_INIT (128) by blk_compute_fresh_geometry() on a fresh format, so a genuinely blank volume was needed to exercise that path. Verified round-trip: fresh format writes 128 (confirmed via direct byte read at header offset 184, independent of kernel self-report), a second boot without reformatting reads it back unchanged. Keep in its formatted (meta_fence_blocks=128) state — a future change that resets or corrupts this on reload is a real regression.

  • artemis-metafence-test.img — 30MB raw image, a direct copy of the pre-existing (pre-fence) artemis.img, added 2026-08-26 alongside the fixture above to verify the other direction: an old volume that predates meta_fence_blocks correctly reads it back as 0 (graceful default via zeroed former padding, not corruption) rather than crashing or misreading adjacent fields.

  • zuse.img — 64MB raw image simulating the physical Zuse superuser thumbdrive for QEMU testing (FABRIC-3.md, Phase 8: zuse.img "bleach" mechanism, added 2026-08-26). 64MB is only this fixture's size, not a constraint on real home-blocks thumbdrives (Captain Bob, 2026-08-26) — the design is not bound to any particular drive size; homeblocks_sig_t's own metadata_devblocks field records whatever size is actually observed on a real drive, nothing in the format hardcodes one. 64MB here is purely an arbitrary QEMU-test convenience (matching usb-thumbdrive-test.img's existing precedent for BOT driver testing scale); use scripts/bleach_zuse_img.sh --size-mb N for a different test size. Blank (all zero) at creation — reads back as HOMEBLOCKS_SIG_BLANK via homeblocks_sig_check(), confirmed live (xhci: USB drive not recognized (blank or foreign media)), simulating a genuine first boot for exercising the still-to-be-built one-time mint-Zuse flow. "Bleach" it back to this pristine/unminted state with scripts/bleach_zuse_img.sh before each first-boot test run, rather than hand-regenerating the file — same all-zero content either way, the script just makes the reset a single documented, repeatable command. Deliberately a flat/raw image, not GPT-partitioned, matching homeblocks_sig_check()'s current call site (repl.c, sig_start_fblock=0) — both will move to a real GPT-partition-relative offset together once a GPT parser exists, not attempted ahead of that.

Convention, standing as of 2026-08-22: every virtual disk/thumb-drive image used for testing — Artemis persistence disks above, and USB Mass Storage backing images alike — lives in this directory and is a tracked, committed file, never scratchpad. This was already artemis.img's convention; usb-thumbdrive-test.img and any future USB test images follow the same rule. Confirmed no .gitignore in this repo excludes disk/*.img.

These are regenerable QEMU raw disk images, not source — see .claude/ARTEMIS.md for the storage model they exercise.