Files
LithosAnanake/disk
Robert Allan JamesandClaude Sonnet 5 cc9521d2cc Retire emergency CLI: Zuse goes thumbdrive-resident, ACL.4th activated
Three tightly-coupled changes, verified together per Captain Bob's own
"getting rid of the emergency cli" direction:

1. Zuse's identity is thumbdrive-resident, never system-resident. New
   zuse_genesis_marker_t (magic/version/zuse_pubkey[32]/crc) replaces
   zuse_cert_devblock_t's slot in the top-of-device fence -- the system
   now remembers only that a root identity exists and its pubkey, never
   a seed. zuse_cert_devblock_t is kept in the repo, marked superseded,
   no longer written by any code path.

   capsule_mint_identity() grows a genesis mode (issuer_vm=NULL): no
   cert is built or written (Zuse isn't verified against a separate
   signer -- she's recognized by pubkey match against the marker) and
   two new optional out-params (out_pubkey/out_seed) let the caller
   install the cert immediately after a genesis mint.

   New capsule_zuse_boot_try_attach() (capsule_zuse_boot.c), called
   from sk_repl_idle() on every fresh USB attach (the only point in the
   boot lifecycle a thumbdrive can actually be detected -- attach
   polling doesn't exist yet at kernel_main.c's old one-shot mint point,
   which is why that whole block is gone): no marker + blank drive ->
   genesis-mint; marker present + matching drive -> read its own
   user_identity_seed_t, install the cert. Either way, re-runs
   ACL-ZUSE-BOOT (zuse.4th) so zuse_session activates exactly like it
   always has for a same-boot cert install -- ACL-PIN only blocks
   redefinition, not re-execution, so no new C-side auth logic needed.

2. ACL.4th activated (capsules/init.4th) -- inactive all session until
   now. Found and fixed a real bug this immediately surfaced: zuse.4th's
   ACL-ZUSE-BOOT tried `['] ACL-ZUSE-BOOT ACL-PIN` from inside its own
   still-compiling definition -- the word isn't findable yet at that
   point, so the whole definition silently failed to compile every
   previous boot this session (dormant, since ACL.4th never loaded).
   Fixed: pin after the definition closes, not from within it -- it
   only needs to happen once anyway, and pinning doesn't block the
   re-invocation genesis/attach needs.

3. The unauthenticated emergency-CLI ACL bypass is retired
   (repl.c): `emergency_console = is_hera ? (zuse_session ? 0 : 1) : 0`
   deleted from both sk_repl_step and sk_repl_run. Every word run from
   Hera's own bare prompt now goes through ordinary ACL enforcement;
   emergency_console is driven only by the genuine C-level fault
   handler again.

Added ZUSE-SESSION? (starforth_words.c), a read-only diagnostic
matching ZUSE-PUBKEY@'s own precedent, to verify the whole chain
directly rather than by inference.

Verified end-to-end live in QEMU: fresh boot, no thumbdrive ->
ZUSE-SESSION? reads 0. Attach a genuinely blank drive via QMP -> genesis
mint fires automatically (no typing) -> ZUSE-SESSION? reads -1 (true).
Hermes/Artemis both birth clean on all three architectures with ACL
now actually enforced for the first time all session -- no denials, no
UNKNOWN WORD beyond the deliberate POST self-test cases.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ZGkimpfyh63EZyRkNbkPD
2026-08-28 16:10:40 -04:00
..

disk/

QEMU disk images used for Artemis (block-storage VM) persistence testing. Mounted via Makefile.starkernel's ARTDISK variable (default disk/artemis.img) as a virtio-blk-pci device on all three architectures' kernel QEMU boots — not scripts/rundisk.sh, which targets a separate, currently-unused disks/ (plural) directory for the hosted VM's --disk-img= flag instead.

  • artemis.img — standard Artemis persistence test disk. Reformatted 2026-08-02: this image had been stuck in a corrupted state (valid LithosAnanke magic header, but data not matching what ART-READ-TEST expects) since before this repo's own git history begins (git log shows it already broken at the initial commit, carried over from the pre-split monorepo). Chasing down the resulting persistent FAIL: persist-read traced to the data, not the code — the write→reboot→read round trip works correctly on a fresh image (see artemis-debug-roundtrip.img below). Reformatted by blanking the file and letting a normal boot format+write-test it; verified PASS: persist-read on amd64, aarch64, and riscv64 against the same image afterward (cross-arch resume, matching the arch-neutral on-disk format .claude/ARTEMIS.md specifies).
  • artemis-debug-roundtrip.img — round-trip regression fixture created during that investigation. Known-good: format → self-test → write-test → reboot → resume → PASS: persist-read, confirmed 3 times in a row. Keep this in a passing state; if a future change breaks it, that's a real regression, not a stale-fixture artifact like artemis.img was.
  • artemis-persist-test.img — persistence round-trip test image (pre-existing; history/state not re-verified during the above investigation).
  • artemis-poison.img — a separate test image (exact scenario not documented elsewhere in the repo as of this writing; name suggests an adversarial/corruption test, not confirmed).
  • artemis-unrecognized-test.img — exercises ART-HALT-UNRECOG (.claude/ARTEMIS.md acceptance criterion #6). Regenerated 2026-08-02: the previous copy of this file had itself been silently reformatted by a since-fixed bug in the generic block subsystem (src/block_subsystem.c) — it carried a valid low-level 'STFR'/v2 header despite being meant to represent foreign disk content, direct forensic evidence of the bug described in .claude/ARTEMIS.md's Build Status item 6. Regenerated as 30MB of a repeating POISON-UNRECOGNIZED-DISK-TEST-FIXTURE--NOT-BLANK-NOT-STFR-NOT-ARTEMIS-- ASCII pattern — deliberately neither blank, nor the block subsystem's own 'STFR' magic, nor Artemis's "ARTEMIS\0" marker. Verified on amd64 and riscv64 post-fix: boot correctly halts (ARTEMIS HALT: unrecognized disk content) and the file's sha256 is now byte-for-byte identical before and after boot. Keep this fixture in this poisoned state — if a future change makes its sha256 change across a boot, that is exactly the regression this fixture exists to catch.

Note on incidental header churn: artemis.img picks up a few changed header bytes on every ordinary boot even though no user data changes — blk_subsys_attach_device() always records a fresh mounted_time on a successfully recognized disk, which gets flushed at shutdown. This is expected bookkeeping, not a bug; revert it before committing rather than carrying timestamp noise in git history.

  • usb-thumbdrive-test.img — 64MB raw image backing a QEMU usb-storage device attached to the xHCI controller's bus (xhci0.0) for Milestone 2e/ 2h hotplug testing, added 2026-08-22. Blank (all zero) — blkio_usb.c + blk_subsys_attach_device() wiring (Milestone 2h, done 2026-08-25) attach it as BLK_FMT_PROVISIONAL every time, which is the intended, exercised state; not yet BLK_FMT_FORMATTED via BLK-CONFIRM-FORMAT.

  • usb-thumbdrive-test2.img — 64MB raw image, added 2026-08-25 for Milestone 2h hot-detach/re-attach verification. Filled with a repeating HOTDETACH-REATTACH-FIXTURE-2026-08-25-- ASCII pattern, deliberately distinguishable from usb-thumbdrive-test.img's all-zero content — the point is proving a block read after detaching usb-thumbdrive-test.img and re-attaching this one actually returns this pattern rather than silently replaying the old device's cached (all-zero) content, which is exactly the class of bug a same-LBN-range device swap can cause if the VM block window cache (vm->blk_vm_cbuf[]) isn't re-validated on a hit.

  • artemis-reloc-test.img — 64MB raw image, added 2026-08-25 for single-block relocation (RELOCATE-BLOCK) persistence verification. Blank at creation; a genuinely fresh volume was required (not artemis.img) because relocation-table capacity (reloc_start/reloc_devblocks in blk_volume_meta_t) is only reserved by blk_compute_fresh_geometry() on a fresh format — artemis.img predates the feature and correctly reads back reloc_devblocks=0 from what was previously unused header padding. Attach via make -f Makefile.starkernel ARTDISK=disk/artemis-reloc-test.img ... (the Makefile's ARTDISK var is ?=-overridable). Not yet BLK-CONFIRM-FORMAT-committed in the repo copy — commit that step live if reusing this fixture for further reloc-table testing.

  • artemis-metafence-fresh.img — 30MB raw image, blank at creation, added 2026-08-26 for the top-of-device system-metadata fence (meta_fence_blocks in blk_volume_meta_t, FABRIC-3.md Phase 8 §C). Same reasoning as artemis-reloc-test.img above: the fence is only initialized to BLK_META_FENCE_INIT (128) by blk_compute_fresh_geometry() on a fresh format, so a genuinely blank volume was needed to exercise that path. Verified round-trip: fresh format writes 128 (confirmed via direct byte read at header offset 184, independent of kernel self-report), a second boot without reformatting reads it back unchanged. Keep in its formatted (meta_fence_blocks=128) state — a future change that resets or corrupts this on reload is a real regression.

  • artemis-metafence-test.img — 30MB raw image, a direct copy of the pre-existing (pre-fence) artemis.img, added 2026-08-26 alongside the fixture above to verify the other direction: an old volume that predates meta_fence_blocks correctly reads it back as 0 (graceful default via zeroed former padding, not corruption) rather than crashing or misreading adjacent fields.

  • zuse.img — 64MB raw image simulating the physical Zuse superuser thumbdrive for QEMU testing (FABRIC-3.md, Phase 8: zuse.img "bleach" mechanism, added 2026-08-26). 64MB is only this fixture's size, not a constraint on real home-blocks thumbdrives (Captain Bob, 2026-08-26) — the design is not bound to any particular drive size; homeblocks_sig_t's own metadata_devblocks field records whatever size is actually observed on a real drive, nothing in the format hardcodes one. 64MB here is purely an arbitrary QEMU-test convenience (matching usb-thumbdrive-test.img's existing precedent for BOT driver testing scale); use scripts/bleach_zuse_img.sh --size-mb N for a different test size. Blank (all zero) at creation — reads back as HOMEBLOCKS_SIG_BLANK via homeblocks_sig_check(), confirmed live (xhci: USB drive not recognized (blank or foreign media)), simulating a genuine first boot for exercising the still-to-be-built one-time mint-Zuse flow. "Bleach" it back to this pristine/unminted state with scripts/bleach_zuse_img.sh before each first-boot test run, rather than hand-regenerating the file — same all-zero content either way, the script just makes the reset a single documented, repeatable command. Deliberately a flat/raw image, not GPT-partitioned, matching homeblocks_sig_check()'s current call site (repl.c, sig_start_fblock=0) — both will move to a real GPT-partition-relative offset together once a GPT parser exists, not attempted ahead of that.

Convention, standing as of 2026-08-22: every virtual disk/thumb-drive image used for testing — Artemis persistence disks above, and USB Mass Storage backing images alike — lives in this directory and is a tracked, committed file, never scratchpad. This was already artemis.img's convention; usb-thumbdrive-test.img and any future USB test images follow the same rule. Confirmed no .gitignore in this repo excludes disk/*.img.

These are regenerable QEMU raw disk images, not source — see .claude/ARTEMIS.md for the storage model they exercise.